Henan Machinery & Equipment Company Limited
Main products:Ball Mill,Rotary Kiln,Rolling Mill,Flotation Machine,Refinery Equipment
Products
Contact Us
  • Contact Person : Ms. juan xiao
  • Company Name : Henan Machinery & Equipment Company Limited
  • Tel : 86-0371-87026122
  • Fax : 86-0371-87026123
  • Address : Henan,zhengzhou,NO 1202,24-1 SHANGWU WAIHUAN ROAD,ZHENGDONG NEW DISTRICT,ZHENGZHOU CITY,HENAN PROVINCE,CHINA.
  • Country/Region : China

200 T Efficient Transporting Girder Vehicle

200 T Efficient Transporting Girder Vehicle
Product Detailed
200 T Efficient Transporting Girder Vehicle 1. Vehicle width 7000mm, 2. Overall length 43200mm 3. High-tech products

200 T Efficient Transporting Girder Vehicle  

1.  Main feature:

  a. Vehicle width 7000mm, overall length 43200mm

  b. the vehicle is high-tech products integrated with “motor, electrical device and hydraulic system”,

adopting hydraulic drive, hydraulic suspension and independent steering for each walk bridge and frame hydraulic elevating leveled, using technical grade microcomputer to control and drive, swerve, go up and down, levelling, as well as realize many kinds of running modes such as direct movement, diagonal movement, splayed swerve and semi splayed swerve.

The whole machine moves very flexibly to achieve driving without slipping or with less slipping and to complete work task in smaller working site

 c. Select and use excellent general parts and standard components during design, all main auxiliary equipments are of famous brand at home and abroad, combination property and engineering level of the whole machine reach international advanced level.

2. Purpose

The girder transporter can transport 20m, 24m, 32m box-girder concrete girder for double track railway special line with speed 350km/h and 250km/h  for transport of passenger , from precast site to girder-erecting workstation via shortcut, roadbed, bridge (steel structure continuous girder and continuous girder with steel ,concrete integrated included),and culvert , and complete relevant girder-erecting work with bridge girder erection machine.

Girder transporter can carry bridge girder erection machine to transfer to another site in short distance between bridges, to pass twin track tunnel on railway special line for transport of passenger

3. Applicable road surface

Dry road surface with flat cement, pitch and consolidated stone , without oil contamination

technical parameters

Load capacity

900t

Self weight

280t

Dimension (L x W x H)

38.6m x 6.95m x 3.4m(cab not included)

Moving speed

Empty load in flat

0-12km/h

Heavy load in flat

0-5km/h

Working pressure

Heavy load in flat

21MPa

Heavy load in climbing

30MPa

Climbing gradient

Min radius in turning

38.4m  outside

26.3m   inside

Power

2 x 420kw

Tyre shafts

16

Tyres

26.5R25, 16 X 4=64

Shaft distance

2.1M

Wheel distance

5.0/1.2m

Wheel pressure

< 0.6MPa

Grounding angle

Off-grounding angle

13°

general arrangements

1.Motor of HZY900C1 girder transporter is placed in rear part, frame girder in middle parts with 2 columns 16 axis, 2 wheels for each wheel set, 64 wheels in total;

a. front 5.5 axis for driving with 22 wheels in total, the tyres are Tsingtao Techking tires 26.5R25 tubeless pneumatic tire which decreases the ground connection pressure of tires to the fullest extent by increasing the contact area;

b. hydraulic pressure suspension device, hydraulic drive, electro-hydraulic steering and hydraulic element are of international famous brand

c. control system is of fieldbus control mode, both the front and rear part install driving cabs with same configuration, main electrical control elements are made in Finland

2.Torsion must be prevented on transporting box-type concrete precast girder.

Because the hydraulic suspension device is in group connection to realize three-point support with isosceles triangle structure, and the box-girder is of symmetrical section, the torsion won’t happen by just keeping its geometric center and center of girder transporter in line when loading

3.When coordinating with girder transporter to feed girder, the statically determinate three-point support is transferred to hyperstatic multipoint support which greatly increase support stability and reduce torsion of frame girder;

a. Because it is still transferred from statically determinate three-point support to hyperstatic multipoint support, the support counterforce does not change, the stress state of box-girder can be kept

b.After lifting one end of box-girder, the suspension center is one strong point, trolley for dragging girder forms two support point, statically determinate three-point is kept.

structure

 1.frame structure

2.trolley for dragging girder

3.hydraulic suspension device

4.dynamic system

5.hydraulic system

6.electrical system

7.brake system

8.steering system

9.cab

200 T Efficient Transporting Girder Vehicle



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.